MCP6562-E/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6562 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 130μA |
| Output Current | 50mA |
| Max Supply Current | 130μA |
| Propagation Delay | 80 ns |
| Quiescent Current | 130μA |
| Response Time | 56 ns |
| Common Mode Rejection Ratio | 66 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 6.5V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 66dB CMRR, 70dB PSRR |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6562-E/MS Overview
A convenient packaging is provided in the form of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .This comparator is of the CMOS, Push-Pull, Rail-to-Rail, TTL output type.As a result, it is designed with Tube package.There are8 terminals on the comparator.Electronic comparator is a part of Comparator family.In the presence of a 1.8V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as General Purpose .This is a 2 element comparator.There are 8 pins on this board.Electronic comparator is recommended to mount the device using type Surface Mount .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.This comparator has 8 pins.Search MCP6562 to find more pin-to-pin solutions.There is a quiescent current of 130μA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal use of the device should require a nominal supply current of 130μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 130μA .Input current to the device is limited to 1pA .
MCP6562-E/MS Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6562-E/MS Applications
There are a lot of Microchip Technology MCP6562-E/MS linear comparators applications.
- Security Detection Systems
- Laptop Computers
- Power Supervision
- High-Speed Sampling Circuits
- Consumer Medical Electronics
- General-Purpose Portable Devices
- Set Top Boxes
- Factory automation & control
- Automatic Test Equipment
- Zero-Crossing Detectors
