MCP6564-E/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6564 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 130μA |
| Output Current | 50mA |
| Max Supply Current | 130μA |
| Propagation Delay | 80 ns |
| Quiescent Current | 130μA |
| Response Time | 56 ns |
| Common Mode Rejection Ratio | 66 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 10mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 6.5V |
| Max Input Current | 1pA |
| Input Bias Current | 5nA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 66dB CMRR, 70dB PSRR |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6564-E/ST Overview
A convenient packaging is provided in the form of 14-TSSOP (0.173, 4.40mm Width) .There is a CMOS, Push-Pull, Rail-to-Rail, TTL output type for this comparator.This chip is designed with the Tube package.Electronic comparator is possible to find the 14 terminals of the comparator.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 1.8V voltage.The type of the chip can be classified as General Purpose .This is a 4 element comparator.Electronic comparator includes 14 pins.Surface Mount universial mout for easy adapting.As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.The comparator consists of 14 pins.Alternatively, you may search for MCP6564 to find more pin-to-pin solutions for your specific needs.The comparator presents a quiescent current of 130μA volts.There is a Surface Mount for mounting it on a PCB or other board.The nominal supply current of the device should be 130μA for normal use.If the current supply exceeds 130μA , the comparator might be damaged.There is sufficient power to run the device from 2/5V power supplies.Electronic comparator is possible to input up to 1pA current into the device.
MCP6564-E/ST Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6564-E/ST Applications
There are a lot of Microchip Technology MCP6564-E/ST linear comparators applications.
- General-Purpose Portable Devices
- Mobile Communications
- Wide Range VCO; MOS Clock Timers
- Wearable Devices
- Consumer Medical Electronics
- Ultra-Low Power Systems
- Notebooks and PDAs
- Body Control Modules
- Simple Analog-to-Digital Converters (ADCs)
- DC/DC and AC/DC power supplies
