MCP6564T-E/ST
| Parameters | |
|---|---|
| Quiescent Current | 130μA |
| Supply Current-Max | 0.52mA |
| Response Time | 56 ns |
| Common Mode Rejection Ratio | 66 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 6.5V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 130μA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 66dB CMRR, 70dB PSRR |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6564 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | 2/5V |
| Output Current | 50mA |
| Propagation Delay | 80 ns |
MCP6564T-E/ST Overview
To facilitate transportation, it comes packaged in 14-TSSOP (0.173, 4.40mm Width) .There is a comparator of type CMOS, Push-Pull, Rail-to-Rail, TTL output on this device.We ship the part through Tape & Reel (TR) .The comparator has 14 terminals.The electrical component in this case belongs to the Comparator family.Supplied by 1.8V voltage, the comparator can accomplish the many demanding tasks.Speaking of types, this is a typical General Purpose comparator.This element consists of 4 elements in total.Electronic comparator has 14 pins.The recommended mounting type is Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.There are 14 pins on the comparator.You may wish to search MCP6564 for more solutions that address your specific needs.A quiescent current of 130μA is displayed by this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.In order to run the device, there are only 2/5V power supplies required.A maximum current of 1pA can be supplied to the device.With a minimum current of 0.52mA , this part can be supplied.The device is packaged in TR and is often used in ADC circuits.
MCP6564T-E/ST Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6564T-E/ST Applications
There are a lot of Microchip Technology MCP6564T-E/ST linear comparators applications.
- Mobile Phones and Tablets
- Security Detection Systems
- Hand-Held Electronics
- Appliances
- High-Speed Sampling Circuits
- Alarm and Monitoring Circuits
- System control and monitoring
- High-Speed Differential Line Receiver
- Wide Range VCO; MOS Clock Timers
- Power Supervision
