MCP6566T-E/LT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6566 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Nominal Supply Current | 130μA |
| Output Current | 50mA |
| Max Supply Current | 130μA |
| Propagation Delay | 80 ns |
| Quiescent Current | 130μA |
| Turn On Delay Time | 56 ns |
| Response Time | 56 ns |
| Common Mode Rejection Ratio | 66 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 66dB CMRR, 70dB PSRR |
| Height | 1mm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6566T-E/LT Overview
The product is packaged in 5-TSSOP, SC-70-5, SOT-353 to facilitate transportation.This comparator is of the CMOS, Open-Drain output type.The chip is packaged with Tape & Reel (TR) .The comparator has a total of 5 terminals.The electrical component in this case belongs to the Comparator families.The comparator is capable of achieving many demanding tasks when supplied with 1.8V voltage.When it comes to types, this comparator is a typical General Purpose .The pinout of the component starts from 5 pins it has.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.This comparator has 5 pins.In case you are looking for more pin-to-pin solutions, you may want to search MCP6566 .There is 130μA current flowing in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be 130μA .The compartator could be damaged if the current supply exceeds 130μA .Electronic comparator is possible to input up to 1pA current into the device.To maintain output quality, 1 channels cooperate.The operating supply voltage for normal operation should be 5V .
MCP6566T-E/LT Features
CMOS, Open-Drain output capability
General Purpose IC
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6566T-E/LT Applications
There are a lot of Microchip Technology MCP6566T-E/LT linear comparators applications.
- System control and monitoring
- Lithium ion battery monitoring
- Battery-Powered Electronics
- Power Supervision
- Automotive
- Building automation
- Window Comparators, Multivibrators
- Point of load regulators
- General Purpose Low Voltage Applications
- Handheld Instruments
