MCP6566T-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | General Purpose |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | MCP6566 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 100μA |
| Output Current | 50mA |
| Propagation Delay | 80 ns |
| Quiescent Current | 130μA |
| Response Time | 56 ns |
| Common Mode Rejection Ratio | 66 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 130μA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 66dB CMRR, 70dB PSRR |
| Natural Thermal Resistance | 256 °C/W |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6566T-E/OT Overview
In order to make transportation easier, it is packaged in SC-74A, SOT-753 .The comparator has a CMOS, Open-Drain output.We ship the part through Tape & Reel (TR) .As you can see, the comparator has5 terminals.Electronic comparator is a part of Comparator family.With a 1.8V voltage supply, the comparator can perform multiple demanding tasks.It's a typical General Purpose comparator.In total, it contains 1 elements.A Surface Mount mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.The comparator consists of 5 pins.Try search MCP6566 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 130μA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normal use of the device should require a nominal supply current of 100μA .A maximum current of 1pA can be supplied to the device.The normal operation of the system requires 5V operating voltage.
MCP6566T-E/OT Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6566T-E/OT Applications
There are a lot of Microchip Technology MCP6566T-E/OT linear comparators applications.
- Mobile Communications
- General Purpose Low Voltage Applications
- Consumer Medical Electronics
- Portable and Battery-Powered Systems
- RC Timers
- Window Comparators
- Handheld Instruments
- Automatic Test Equipment
- Factory automation & control
- High-Speed Sampling Circuits
