MCP6566UT-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Digi-Reel® |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6566U |
| Pin Count | 5 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Output Current | 50mA |
| Propagation Delay | 80 ns |
| Quiescent Current | 130μA |
| Response Time | 56 ns |
| Common Mode Rejection Ratio | 66 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 130μA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 66dB CMRR, 70dB PSRR |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6566UT-E/OT Overview
To facilitate transportation, it comes packaged in SC-74A, SOT-753 .A comparator with an output type of CMOS, Open-Drain is being used.This chip is designed with the Digi-Reel? package.The comparator has a total of 5 terminals.The chip belongs to Comparator .With a voltage of 1.8V supplied, the comparator is capable of performing a wide range of demanding tasks.It's a typical General Purpose comparator.This is a 1 element comparator.The device includes 5 pins.The type of mounting recommended is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .There are 5 pins on the comparator.You can find more pin-to-pin solutions by searching MCP6566U .In this comparator, the quiescent current is 130μA .A Surface Mount is provided for mounting it onto a PCB or another board.A maximum current of 1pA can be supplied to the device.The operating supply voltage for normal operation should be 5V .
MCP6566UT-E/OT Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6566UT-E/OT Applications
There are a lot of Microchip Technology MCP6566UT-E/OT linear comparators applications.
- Self-diagnostics
- Window Comparators, Multivibrators
- Notebooks and PDAs
- Current and voltage sensing
- Wide Range VCO; MOS Clock Timers
- Industrial
- Factory automation & control
- General-Purpose, Low-Voltage Applications
- Lithium ion battery monitoring
- Mobile Communications
