MCP6569-E/SL
| Parameters | |
|---|---|
| Base Part Number | MCP6569 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Nominal Supply Current | 100μA |
| Output Current | 50mA |
| Propagation Delay | 80 ns |
| Quiescent Current | 130μA |
| Response Time | 56 ns |
| Common Mode Rejection Ratio | 66 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 130μA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 66dB CMRR, 70dB PSRR |
| Natural Thermal Resistance | 120 °C/W |
| Height | 1.25mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
MCP6569-E/SL Overview
To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .There is a CMOS, Open-Drain output type for this comparator.As a result, it is designed with Tube package.The comparator has 14 terminals.Electronic comparator is a component of the Comparator family.With a 1.8V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .A total of 4 elements can be found in it.As a result, it contains 14 pins.A Surface Mount mounting type is recommended.The operating temperature should be set to -40°C~125°C to avoid mal-function.Electronic comparator has 14 pins.You can find more pin-to-pin solutions by searching MCP6569 .As a result, this comparator displays a quiescent current of 130μA .A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current for the device be set to 100μA .Comparator electronics is necessary to have a voltage of 5V for normal operation.
MCP6569-E/SL Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6569-E/SL Applications
There are a lot of Microchip Technology MCP6569-E/SL linear comparators applications.
- Wireless Base Stations
- Appliances
- Wide Range VCO; MOS Clock Timers
- Alarm and Monitoring Circuits
- Power management
- Security Detection Systems
- Industrial
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
- Motor drives
