MCP6569-E/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6569 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 4 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 100μA |
| Output Current | 50mA |
| Propagation Delay | 80 ns |
| Quiescent Current | 130μA |
| Response Time | 56 ns |
| Common Mode Rejection Ratio | 66 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 6.5V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 130μA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 66dB CMRR, 70dB PSRR |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6569-E/ST Overview
The product is packaged in 14-TSSOP (0.173, 4.40mm Width) to facilitate transportation.The comparator has an output type of CMOS, Open-Drain .This device is designed in Tube case.As you can see, the comparator has14 terminals.The electrical component in this case belongs to the Comparator family.With a 1.8V voltage supply, the comparator can perform multiple demanding tasks.In terms of type, this is a typical General Purpose comparator.The total number of elements is 4 .There are 14 pins on this board.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.There are 14 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search MCP6569 .The comparator presents a quiescent current of 130μA volts.There is a Surface Mount for mounting it on a PCB or other board.Normal operation of the device requires 100μA supply current.In order to operate the device, 2/5V power supplies are sufficient.
MCP6569-E/ST Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6569-E/ST Applications
There are a lot of Microchip Technology MCP6569-E/ST linear comparators applications.
- Power Supervision
- Window Comparators
- Wearable Devices
- DC/DC and AC/DC power supplies
- Pulse, Squarewave, and Time Delay Generators
- Battery-Powered Electronics
- Building automation
- System control and monitoring
- Handheld Instruments
- Automatic Test Equipment
