MCP6569T-E/SL
| Parameters | |
|---|---|
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6569 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 4 |
| Power Supplies | 2/5V |
| Output Current | 50mA |
| Propagation Delay | 80 ns |
| Quiescent Current | 130μA |
| Supply Current-Max | 0.13mA |
| Response Time | 56 ns |
| Common Mode Rejection Ratio | 66 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 6.5V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 130μA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 66dB CMRR, 70dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
MCP6569T-E/SL Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.The comparator has an output type of CMOS, Open-Drain .As a result, it is designed with Tape & Reel (TR) package.The comparator has a total of 14 terminals.The component belongs to the Comparator family of electrical components.In the presence of a 1.8V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator can be classified as a General Purpose chip.This element consists of 4 elements in total.As a result, it contains 14 pins.Electronic comparator is recommended to mount the device using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.Electronic comparator has 14 pins.You can find more pin-to-pin solutions for your special requirements by searching MCP6569 .A quiescent current of 130μA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.The device can be operated with 2/5V power supplies.The part can be powered at a minimum current of 0.13mA .
MCP6569T-E/SL Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6569T-E/SL Applications
There are a lot of Microchip Technology MCP6569T-E/SL linear comparators applications.
- Portable Battery Monitoring
- Power management
- Analog front end
- Building automation
- Power Supervision
- Metering Systems
- Battery-Powered Electronics
- High-Speed Differential Line Receiver
- Wide Range VCO; MOS Clock Timers
- Notebooks and PDAs
