MCP65R41T-2402E/CHY
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP65R41 |
| Pin Count | 6 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 2.5μA |
| Output Current | 50mA |
| Propagation Delay | 8 μs |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4 μs |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 4μA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Natural Thermal Resistance | 190.5 °C/W |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP65R41T-2402E/CHY Overview
The product is packaged in SOT-23-6 in order to facilitate transportation.There is a CMOS, Push-Pull, TTL output type for this comparator.The chip is packaged with Tape & Reel (TR) .Electronic comparator is possible to find the 6 terminals of the comparator.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Electronic comparator can be classified as a with Voltage Reference chip.In total, it contains 1 elements.There are 6 pins on this board.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.The comparator is equipped with 6 pins.Alternatively, you may search for MCP65R41 to find more pin-to-pin solutions for your specific needs.In this comparator, the quiescent current is 4μA .The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current of the device be 2.5μA .In order to run the device, there are only 2/5V power supplies required.Electronic comparator is possible to input a maximum of 1pA current into the device.
MCP65R41T-2402E/CHY Features
CMOS, Push-Pull, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 4μA
MCP65R41T-2402E/CHY Applications
There are a lot of Microchip Technology MCP65R41T-2402E/CHY linear comparators applications.
- Building automation
- Portable Battery Monitoring
- Body Control Modules
- Mobile Communications
- Battery-Powered Electronics
- Notebooks and PDAs
- Window Comparators, Multivibrators
- Motor drives
- Battery management and protection
- Portable and Battery-Powered Systems
