MCP65R46T-1202E/CHY
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP65R46 |
| Pin Count | 6 |
| Output Type | CMOS, Open-Drain, TTL |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 4μA |
| Output Current | 50mA |
| Max Supply Current | 4μA |
| Propagation Delay | 4 μs |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4 μs |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 10mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 8μs |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP65R46T-1202E/CHY Overview
The product is packaged in SOT-23-6 to facilitate transportation.Output type CMOS, Open-Drain, TTL is used for this comparator.As a result, it is designed with Tape & Reel (TR) package.The comparator has a total of 6 terminals.The electrical component here belongs to the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.A comparator of this type is typically of type General Purpose .This is a 1 element comparator.The pinout of the component starts from 6 pins it has.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .The comparator is equipped with 6 pins.Alternatively, you may search for MCP65R46 to find more pin-to-pin solutions for your specific needs.This comparator presents a quiescent current of 4μA .The PCB or other board can be mounted using the Surface Mount on it.The nominal supply current of the device should be 4μA for normal use.The compartator could be damaged if the current supply exceeds 4μA .A power supply of 2/5V is sufficient for the operation of the device.Input current to the device cannot exceed 1pA .
MCP65R46T-1202E/CHY Features
CMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 4μA
MCP65R46T-1202E/CHY Applications
There are a lot of Microchip Technology MCP65R46T-1202E/CHY linear comparators applications.
- Zero-Crossing Detectors
- General Purpose Low Voltage Applications
- Window Comparators
- Portable and Battery-Powered Systems
- Lithium ion battery monitoring
- Portable Battery Monitoring
- Threshold Detectors
- Pulse, Squarewave, and Time Delay Generators
- Window Comparators
- Automatic Test Equipment
