Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
NICKEL PALLADIUM GOLD |
Subcategory |
Comparator |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MCP65R46 |
Pin Count |
6 |
Output Type |
CMOS, Open-Drain, TTL |
Number of Elements |
1 |
Power Supplies |
2/5V |
Nominal Supply Current |
4μA |
Output Current |
50mA |
Max Supply Current |
4μA |
Propagation Delay |
8 μs |
Quiescent Current |
4μA |
Turn On Delay Time |
4 μs |
Response Time |
4000 ns |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
10mV |
Average Bias Current-Max (IIB) |
0.005μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
7V |
Max Input Current |
1pA |
Input Bias Current |
1pA |
Voltage - Input Offset (Max) |
10mV @ 5.5V |
Current - Input Bias (Max) |
1pA @ 5.5V |
Hysteresis |
5mV |
CMRR, PSRR (Typ) |
70dB CMRR, 80dB PSRR |
Height |
1.3mm |
Length |
3.1mm |
Width |
1.8mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MCP65R46T-2402E/CHY Overview
In order to facilitate transportation, it is packaged in SOT-23-6 .Output type of this comparator is CMOS, Open-Drain, TTL .Ready for shipping in Tape & Reel (TR) package.There are6 terminals on the comparator.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator can be classified as a General Purpose chip.There are a total of 1 elements in it.The board includes 6 pins.Electronic comparator is recommended that the mounting type be Surface Mount .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.There are 6 pins on the comparator.You can search MCP65R46 if you are looking for more pin-to-pin solutions.There is 4μA current flowing in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires 4μA supply current.A current supply greater than 4μA may result in the comparator malfunctioning.The device can be powered by 2/5V power supplies.There is a maximum current that can be input into the device of 1pA .
MCP65R46T-2402E/CHY Features
CMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 4μA
MCP65R46T-2402E/CHY Applications
There are a lot of Microchip Technology MCP65R46T-2402E/CHY linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Point of load regulators
- Window Comparators
- Consumer Medical Electronics
- Lithium ion battery monitoring
- Body Control Modules
- Self-diagnostics
- Appliances
- RC Timers
- General Purpose Low Voltage Applications