MCP661T-E/MNY
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP661 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 6mA |
| Output Current | 90mA |
| Slew Rate | 32V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 64 dB |
| Current - Input Bias | 6pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 8mV |
| Gain Bandwidth Product | 60MHz |
| Unity Gain BW-Nom | 60000 kHz |
| Voltage Gain | 126dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.5V |
| Voltage - Input Offset | 1.8mV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP661T-E/MNY Overview
The linear amplifier is packaged in a 8-WFDFN Exposed Pad case which makes it easy for the consumer to handle. Buffer amps of this type are called General Purpose-types. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. It consists of a total of 8 pins in total. The linear amplifier should be run at 2.5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, buffer amplifier rates 8mV voltage. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Op amp is a member of the 126dB's 126dB family. A linear amplifier like this has 1 circuits on it. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. For the operating supply voltage of the op amp ic, there is a rating of 1. TAPE AND REEL is adopted to pack the instrumentation amplifier.
MCP661T-E/MNY Features
8 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail
MCP661T-E/MNY Applications
There are a lot of Microchip Technology MCP661T-E/MNY Instrumentational OP Amps applications.
- Broadcasting
- Band-stop filter
- Medical imaging
- Video data acquisition
- Mobile phone
- High speed sample
- Weak signal detection
- Displayers for aircraft and air transportation control systems
- Multimedia playback equipment
- earphone
