MCP662T-E/MF
| Parameters | |
|---|---|
| Voltage - Input Offset | 1.8mV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP662 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Number of Circuits | 2 |
| Nominal Supply Current | 6mA |
| Output Current | 90mA |
| Slew Rate | 32V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 64 dB |
| Current - Input Bias | 6pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 8mV |
| Gain Bandwidth Product | 60MHz |
| Unity Gain BW-Nom | 60000 kHz |
| Voltage Gain | 126dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.5V |
MCP662T-E/MF Overview
There is a 8-VDFN Exposed Pad case in which the instrumentation amplifier is packaged. This is a General Purpose type op amp. A Tape & Reel (TR) case is used to deliver the buffer op amp. We are approaching the 8h termination of the year. A total of 8 pins are attached to buffer op amp. Please take in mind that op amp should be run at 2.5V. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 8mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. It is a member of the 126dB's 126dB family. There are 2 circuits on this op amp. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method.
MCP662T-E/MF Features
8 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail
MCP662T-E/MF Applications
There are a lot of Microchip Technology MCP662T-E/MF Instrumentational OP Amps applications.
- Commercial audio systems
- Mobile phone
- Power generator
- Radar
- Professional videography
- ECG equipment
- Logarithmic operation circuits
- Fast A/D and D/A converters
- Weighing systems
- Automation control systems
