MCP669-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP669 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Operating Supply Current | 6mA |
| Nominal Supply Current | 6mA |
| Output Current | 90mA |
| Slew Rate | 32V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 64 dB |
| Current - Input Bias | 6pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 1.8mV |
| Bandwidth | 60MHz |
| Unity Gain BW-Nom | 60000 kHz |
| Voltage Gain | 126dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.5V |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Height | 950μm |
| Length | 4mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP669-E/ML Overview
Packaging for the buffer amplifier is in the form of a 16-VQFN Exposed Pad case. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 16. In total, there are 16 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 2.5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 16 pins are included on the operational amplifiers. The input offset voltage is 1.8mV. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. This op amp can operate from a supply current at 6mA. 126dB should be the voltage gain. Buffer op amp is equipped with 4 channels on the device. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals.
MCP669-E/ML Features
16 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail
MCP669-E/ML Applications
There are a lot of Microchip Technology MCP669-E/ML Instrumentational OP Amps applications.
- Voltage regulation circuit
- Differentiator circuits
- Industrial applications including automation
- Multimedia playback equipment
- Signal transformation
- Medical instruments
- Fast A/D and D/A converters
- Multiplication circuits
- Semiconductor detectors
- Signal operation
