MCP6G01-E/MS
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6G01 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 110μA |
| Nominal Supply Current | 110μA |
| Slew Rate | 4.5V/μs |
| Amplifier Type | General Purpose |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 4.5mV |
| Bandwidth | 900 kHz |
| Voltage Gain | 33.98dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 1mV |
| -3db Bandwidth | 0.9MHz |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.05% |
| Height | 1.1mm |
| Length | 3mm |
| Width | 4.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
MCP6G01-E/MS Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. An op amp ic of the General Purpose type. Linear amplifier is delivered in a Tube case. The number of terminations is approaching the 8 mark. A total of 8 pins are attached to buffer op amp. A type of Instrumentation Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 4.5mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Using a supply current of 110μA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 33.98dB. As far as the device is concerned, buffer amplifier has 1 channels. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of the buffer op amp is rated at 5V.
MCP6G01-E/MS Features
8 Pins
33.98dB voltage gain
Output Type: Rail-to-Rail
MCP6G01-E/MS Applications
There are a lot of Microchip Technology MCP6G01-E/MS Instrumentational OP Amps applications.
- Television broadcasting equipment
- Laptop
- Subtraction operation circuits
- Scintillation detectors
- Home audio systems
- Displayers for aircraft and air transportation control systems
- High gain DC amplifier
- Multiplication circuits
- High input resistance broadband
- Logarithmic operation circuits
