MCP6G01T-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6G01 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 2/5V |
| Number of Channels | 1 |
| Operating Supply Current | 110μA |
| Slew Rate | 4.5V/μs |
| Amplifier Type | General Purpose |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 4.5mV |
| Bandwidth | 900 kHz |
| Voltage Gain | 33.98dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 1mV |
| -3db Bandwidth | 0.9MHz |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.05% |
| Height | 1.55mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6G01T-E/SN Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp ic of the General Purpose type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 8. Linear amplifier has a total of 8 pins. I would like to specify that this buffer amplifier belongs to the Instrumentation Amplifier-type of devices. There are 8 pins on this chip. Op amp ic rates 4.5mV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Operational amplifier can operate supply current at 110μA. Maintain 33.98dB as the voltage gain. 1 channels are available on the instrumentation amplifier. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals.
MCP6G01T-E/SN Features
8 Pins
33.98dB voltage gain
Output Type: Rail-to-Rail
MCP6G01T-E/SN Applications
There are a lot of Microchip Technology MCP6G01T-E/SN Instrumentational OP Amps applications.
- Home audio systems
- Multimedia playback equipment
- Digital cameras
- Television
- Switching amplifier
- Video amplifiers
- Addition operation circuits
- Mobile phone
- High-frequency data acquisition systems
- Test and measurement instruments
