MCP6G01UT-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6G01 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Current - Supply | 110μA |
| Slew Rate | 4.5V/μs |
| Amplifier Type | General Purpose |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 4.5mV |
| Bandwidth | 900 kHz |
| Voltage Gain | 33.98dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 1mV |
| -3db Bandwidth | 0.9MHz |
| Voltage Gain-Nom | 10 |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6G01UT-E/OT Overview
There is a SC-74A, SOT-753 case in which the instrumentation amplifier is packaged. A General Purpose-type buffer amplifier is shown here. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There have been a total of 5 terminations over the past year. The total number of pins on linear amplifier is 5. I would like to specify that this buffer amplifier belongs to the Instrumentation Amplifier-type of devices. Linear amplifier includes 5 pins. Regarding input offset voltage, op amp rates 4.5mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. 33.98dB should be the voltage gain. Op amp ic has 1 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage. It is recommended that you use an 110μA power supply with this electrical part in order for it to operate correctly.
MCP6G01UT-E/OT Features
5 Pins
33.98dB voltage gain
Output Type: Rail-to-Rail
MCP6G01UT-E/OT Applications
There are a lot of Microchip Technology MCP6G01UT-E/OT Instrumentational OP Amps applications.
- Video amplifiers
- Commercial audio systems
- Semiconductor detectors
- Signal filtering
- single/dual op amp sum and difference circuits
- Gaming industry
- Laptop
- Industrial control system
- ECG equipment
- Thermocouples
