MCP6G04T-E/SL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6G04 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Operating Supply Current | 110μA |
| Slew Rate | 4.5V/μs |
| Amplifier Type | General Purpose |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 4.5mV |
| Voltage Gain | 33.98dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 1mV |
| -3db Bandwidth | 900kHz |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.05% |
| Height Seated (Max) | 1.75mm |
| Length | 8.69mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6G04T-E/SL Overview
There is a 14-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations approaches 14. It consists of a total of 14 pins in total. It should be noted that this op amp is a type of Instrumentation Amplifier device. 14 pins are included on the operational amplifiers. The input offset voltage is 4.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, this op amp functions well at -40°C~125°C. You can run this op amp ic on 110μA . You should keep the voltage gain at 33.98dB for the time being. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. 4 elements make up the design of this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 5V voltage.
MCP6G04T-E/SL Features
14 Pins
33.98dB voltage gain
Output Type: Rail-to-Rail
MCP6G04T-E/SL Applications
There are a lot of Microchip Technology MCP6G04T-E/SL Instrumentational OP Amps applications.
- Test and measurement instruments
- Image computer boards
- Division circuits
- Test equipment
- Voltage regulation circuit
- Blood pressure sensors
- Computer workstations
- Weighing systems
- Laptop
- Large motor controllers
