MCP6H01T-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6H01 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 135μA |
| Output Current | 50mA |
| Slew Rate | 0.8V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 84 dB |
| Current - Input Bias | 10pA |
| Max Input Voltage | 16V |
| Voltage - Supply, Single/Dual (±) | 3.5V~16V ±1.75V~8V |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 1.2MHz |
| Unity Gain BW-Nom | 1200 kHz |
| Voltage Gain | 115dB |
| Power Supply Rejection Ratio (PSRR) | 87dB |
| Voltage - Input Offset | 700μV |
| Dual Supply Voltage | 5V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP6H01T-E/OT Overview
Packaged in a SC-74A, SOT-753 case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations approaches 5. The total number of pins on linear amplifier is 5. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 5 pins. Regarding input offset voltage, op amp rates 3.5mV. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . There should be no change in the voltage gain. This op amp contains 1 circuits. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The op amp is rated for an operating supply voltage of 1. The operating supply voltage of the buffer op amp is rated at 8V.
MCP6H01T-E/OT Features
5 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6H01T-E/OT Applications
There are a lot of Microchip Technology MCP6H01T-E/OT Instrumentational OP Amps applications.
- pH (acidity)
- Commercial audio systems
- RF cable systems
- Car stereo
- Portable media players
- Computer workstations
- Non-polarized electrodes
- Information processing
- Biopotential
- Polarized electrodes
