MCP6H81-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6H81 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 700μA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 3.5V~12V ±1.75V~6V |
| Output Current per Channel | 55mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 5.5MHz |
| Unity Gain BW-Nom | 5500 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | NO |
| Max Frequency | 10kHz |
| Programmable Power | NO |
| Height | 1.5mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6H81-E/SN Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. The op amp is delivered to you in a Tube case. It is estimated that there will be at least 8 terminations this year. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 8 pins. Regarding input offset voltage, op amp rates 1mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 700μA . Keeping the voltage gain at 120dB is the best course of action. Instrumentation amplifier has 1 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has.
MCP6H81-E/SN Features
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
MCP6H81-E/SN Applications
There are a lot of Microchip Technology MCP6H81-E/SN Instrumentational OP Amps applications.
- Weighing systems
- Video data acquisition
- Integrator circuits
- Car stereo
- ECG equipment
- Test equipment
- Radar
- Proportional operation circuits
- Switching amplifier
- Information processing
