MCP6H81T-E/MNY
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6H81 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Current - Supply | 700μA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 3.5V~12V ±1.75V~6V |
| Gain Bandwidth Product | 5.5MHz |
| Unity Gain BW-Nom | 5500 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Current - Output / Channel | 55mA |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
MCP6H81T-E/MNY Overview
Packaged in a 8-WFDFN Exposed Pad case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the General Purpose-type. Linear amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. It is important to remember that this op amp should be operated at a voltage of 5V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 8-pin op amp ic is included in the package. Surface Mount is the recommended mounting type for this linear amplifier. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. 120dB should be the voltage gain. This op amp ic has 1 circuits. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. To run supply current of buffer amplifier under 700μA.
MCP6H81T-E/MNY Features
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
MCP6H81T-E/MNY Applications
There are a lot of Microchip Technology MCP6H81T-E/MNY Instrumentational OP Amps applications.
- Television broadcasting equipment
- Medical imaging
- Commercial audio systems
- Signal amplification
- Fast A/D and D/A converters
- Active probe
- Computer workstations
- Broadcasting
- Industrial control system
- High speed sample
