MCP6H84-E/SL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6H84 |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.75/+-6/3.5/12V |
| Number of Channels | 4 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 700μA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 3.5V~12V ±1.75V~6V |
| Output Current per Channel | 55mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 5.5MHz |
| Unity Gain BW-Nom | 5500 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 13.2V |
| Low-Bias | YES |
| Micropower | NO |
| Max Frequency | 10kHz |
| Programmable Power | NO |
| Height | 1.5mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6H84-E/SL Overview
There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. The case in which buffer amplifier is delivered is called a Tube case. We are approaching the 14h termination of the year. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 14 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 1mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . You can run this op amp ic on 700μA . Voltage gain should remain at 120dB. Instrumentation amplifier has 4 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has.
MCP6H84-E/SL Features
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
MCP6H84-E/SL Applications
There are a lot of Microchip Technology MCP6H84-E/SL Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Hand-held batteries
- Scintillation detectors
- Tablets
- Subtraction operation circuits
- Video computer boards
- Biopotential
- Industrial control system
