MCP6H94T-E/SL
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6H94 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | +-1.75/+-6/3.5/12V |
| Number of Circuits | 4 |
| Operating Supply Current | 2mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 10μA |
| Voltage - Supply, Single/Dual (±) | 3.5V~12V ±1.75V~6V |
| Output Current per Channel | 41mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 115dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 13V |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
MCP6H94T-E/SL Overview
It is packaged in an 14-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations is approaching the 14 mark. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. 14 pins are included on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 1mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, this op amp functions well at -40°C~125°C. This op amp can operate from a supply current at 2mA. It is recommended to keep the voltage gain at 115dB at all times. The buffer amp consists of 4 circuits in total. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The buffer op amp is rated for an operating voltage of 4 when it comes to the power supply. As a result of this, the buffer amplifier is packed in TAPE AND REEL.
MCP6H94T-E/SL Features
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6H94T-E/SL Applications
There are a lot of Microchip Technology MCP6H94T-E/SL Instrumentational OP Amps applications.
- Portable electronic products powered by batteries
- Signal filtering
- Signal amplification
- Instrumentation
- RF cable systems
- Scintillation detectors
- Multimedia playback equipment
- Differentiator circuits
- Exponential operation circuits
- Tablets
