MCP6L71T-E/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6L71 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 150μA |
| Output Current | 25mA |
| Slew Rate | 0.9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 91 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2V~6V |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 2MHz |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 105dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 1mV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MCP6L71T-E/MS Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp of this type is a General Purpose-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. The total number of pins on linear amplifier is 8. Please take in mind that this instrumentation amplifier should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. It has 8 pins that make up the linear amplifier. There is an input offset voltage of 4mV for this buffer op amp. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . There should be no change in the voltage gain at 105dB. This op amp ic has 1 circuits. Buffer op amp is equipped with 1 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. This linear amplifier pack is based on the TAPE AND REEL axis.
MCP6L71T-E/MS Features
8 Pins
supply voltage of 5V
105dB voltage gain
Output Type: Rail-to-Rail
MCP6L71T-E/MS Applications
There are a lot of Microchip Technology MCP6L71T-E/MS Instrumentational OP Amps applications.
- Portable electronic products powered by batteries
- Blood pressure sensors
- Displayers for aircraft and air transportation control systems
- Industrial applications including automation
- Wireless base stations
- Industrial control system
- RF cable systems
- Navigation
- Video computer boards
- Medical instruments
