MCP6L91T-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6L91 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 850μA |
| Output Current | 25mA |
| Slew Rate | 7V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 91 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.4V~6V |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 105dB |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 1mV |
| Height | 1.2954mm |
| Length | 3.0988mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6L91T-E/OT Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations approaches 5. A total of 5 pins are attached to buffer op amp. This linear amplifier should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 5 pins. In terms of the input offset voltage, instrumentation amplifier rates at 4mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~125°C. Voltage gain should remain at 105dB. This op amp contains 1 circuits. As far as the device is concerned, buffer amplifier has 1 channels. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits.
MCP6L91T-E/OT Features
5 Pins
supply voltage of 5V
105dB voltage gain
Output Type: Rail-to-Rail
MCP6L91T-E/OT Applications
There are a lot of Microchip Technology MCP6L91T-E/OT Instrumentational OP Amps applications.
- Portable docking station
- Power generator
- Professional videography
- Portable media players
- Television
- Image computer boards
- Proportional counter tubes
- Differentiator circuits
- Test equipment
- High-frequency data acquisition systems
