MCP6N11-001E/SN
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6N11 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 800μA |
| Max Supply Current | 800μA |
| Slew Rate | 9V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 62 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 500 kHz |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| Supply Voltage Limit-Max | 6.5V |
| -3db Bandwidth | 35MHz |
| Non-linearity-Max | 0.05% |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
MCP6N11-001E/SN Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. The instrumentation amplifier in this picture is of the Instrumentation-type. The op amp is delivered to you in a Tube case. It is estimated that there will be at least 8 terminations this year. There are a total of 8 pins on this op amp. 8 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. Surface Mount is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. There are 1 circuits on this op amp. There are 1 channels on the operational amplifiers. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2.
MCP6N11-001E/SN Features
8 Pins
Output Type: Rail-to-Rail
MCP6N11-001E/SN Applications
There are a lot of Microchip Technology MCP6N11-001E/SN Instrumentational OP Amps applications.
- Automatic control
- Scintillation detectors
- Proportional counter tubes
- High gain DC amplifier
- Instrumentation
- Strain gauges
- Laptop
- Switching amplifier
- Test equipment
- Test and measurement instruments
