MCP6N11-002E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6N11 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 800μA |
| Max Supply Current | 800μA |
| Slew Rate | 9V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 69 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1MHz |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Supply Voltage Limit-Max | 6.5V |
| -3db Bandwidth | 35MHz |
| Non-linearity-Max | 0.05% |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6N11-002E/SN Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Op amps are Instrumentation types of amplifier on the chip. The op amp is delivered to you in a Tube case. In recent months, the number of terminations has approached 8. Buffer amplifier has a total of 8 pins on it. In total, the buffer amplifier consists of 8 pins. There is an input offset voltage of 2mV for this buffer op amp. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . During the manufacturing process, this buffer amplifier is divided into 1 circuits. Op amp ic has 1 channels. On the output type, there are Rail-to-Rail different types of op amps. This linear amplifier has a total of 2 elements.
MCP6N11-002E/SN Features
8 Pins
Output Type: Rail-to-Rail
MCP6N11-002E/SN Applications
There are a lot of Microchip Technology MCP6N11-002E/SN Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Portable electronic products powered by batteries
- Subtraction operation circuits
- Biopotential
- Automation control systems
- Oscilloscopes
- High speed sample
- Measurements of Wheatstone bridge
- E-book readers
- Industrial applications including automation
