MCP6N11-005E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6N11 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 800μA |
| Max Supply Current | 800μA |
| Slew Rate | 9V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 850μV |
| Bandwidth | 2.5MHz |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Supply Voltage Limit-Max | 6.5V |
| -3db Bandwidth | 35MHz |
| Non-linearity-Max | 0.05% |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6N11-005E/SN Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. Op amps are Instrumentation types of amplifier on the chip. A Tube case is used for delivering the op amp. The number of terminations is approaching the 8 mark. Linear amplifier has a total of 8 pins. It has 8 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 850μV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, this op amp functions well at -40°C~125°C. This op amp ic has 1 circuits. Instrumentation amplifier has 1 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2.
MCP6N11-005E/SN Features
8 Pins
Output Type: Rail-to-Rail
MCP6N11-005E/SN Applications
There are a lot of Microchip Technology MCP6N11-005E/SN Instrumentational OP Amps applications.
- Band-pass filter
- Cinema or auditorium audio system
- Non-polarized electrodes
- Proportional counter tubes
- Portable media players
- Power transmission
- Logarithmic operation circuits
- Car stereo
- Multimedia playback equipment
- Home audio systems
