MCP6N11T-001E/MNY
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6N11 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 800μA |
| Max Supply Current | 800μA |
| Slew Rate | 9V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 500 kHz |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| Supply Voltage Limit-Max | 6.5V |
| -3db Bandwidth | 35MHz |
| Non-linearity-Max | 0.05% |
| Height | 750μm |
| Length | 3mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6N11T-001E/MNY Overview
Op amp is packaged in 8-WFDFN Exposed Pad case. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. During the past two weeks, there have been close to 8 terminations. The pins on this board total to 8 in total. It has 8 pins that make up the linear amplifier. Op amp rates 3mV as input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. On this instrumentation amplifier, there are 1 circuits that are connected together. Op amp ic has 1 channels. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The total number of elements in this buffer amplifier is 2.
MCP6N11T-001E/MNY Features
8 Pins
Output Type: Rail-to-Rail
MCP6N11T-001E/MNY Applications
There are a lot of Microchip Technology MCP6N11T-001E/MNY Instrumentational OP Amps applications.
- ECG equipment
- Medical imaging
- Signal amplification
- Broadcasting
- Television broadcasting equipment
- Gaming industry
- Voltage regulation circuit
- Large motor controllers
- Strain gauges
- Signal filtering
