MCP6N11T-005E/SN
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6N11 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 800μA |
| Slew Rate | 9V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 850μV |
| Gain Bandwidth Product | 2.5MHz |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Supply Voltage Limit-Max | 6.5V |
| -3db Bandwidth | 35MHz |
| Non-linearity-Max | 0.05% |
| Length | 4.9mm |
MCP6N11T-005E/SN Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the Instrumentation type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. In this case, there are 8 pins on the board. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 850μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. A supply current of 800μA can be used to operate this linear amplifier. On this buffer amplifier, there are 1 circuits. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The op amp is rated for an operating supply voltage of 2.
MCP6N11T-005E/SN Features
8 Pins
Output Type: Rail-to-Rail
MCP6N11T-005E/SN Applications
There are a lot of Microchip Technology MCP6N11T-005E/SN Instrumentational OP Amps applications.
- Home audio systems
- Strain gauges
- PDA
- Mobile phone
- Band-stop filter
- Portable docking station
- Industrial control system
- Communication device
- MP3
- Video computer boards
