MCP6N11T-010E/MNY
| Parameters | |
|---|---|
| Operating Supply Current | 800μA |
| Nominal Supply Current | 800μA |
| Max Supply Current | 800μA |
| Slew Rate | 9V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 81 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 5MHz |
| Voltage Gain | 20dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 81dB |
| Supply Voltage Limit-Max | 6.5V |
| -3db Bandwidth | 35MHz |
| Non-linearity-Max | 0.05% |
| Height | 750μm |
| Length | 3mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6N11 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Number of Channels | 1 |
MCP6N11T-010E/MNY Overview
There is a 8-WFDFN Exposed Pad case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins on it. It has 8 pins that make up the linear amplifier. Op amp rates 500μV as input offset voltage. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. This op amp can operate from a supply current at 800μA. 20dB should be the voltage gain. There are 1 channels on the operational amplifiers. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. Op amp has total of 2 elements.
MCP6N11T-010E/MNY Features
8 Pins
20dB voltage gain
Output Type: Rail-to-Rail
MCP6N11T-010E/MNY Applications
There are a lot of Microchip Technology MCP6N11T-010E/MNY Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- Multimedia playback equipment
- Professional videography
- High-frequency data acquisition systems
- Digital cameras
- Voltage regulation circuit
- Portable electronic products powered by batteries
- Weak signal detection
- Subtraction operation circuits
- Portable media players
