MCP6N16-001E/MS
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.9V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6N16 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 1.1mA |
| Slew Rate | 6 V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 89 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 85μV |
| Bandwidth | 500 kHz |
| Supply Voltage Limit-Max | 6.5V |
| Voltage Gain-Min | 1 |
| Voltage Gain-Nom | 102 |
| Non-linearity-Max | 0.25% |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
MCP6N16-001E/MS Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. Instrumentation-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. Please take in mind that this instrumentation amplifier should be run at 2.9V. There are 8 pins on this chip. Op amp rates 85μV as input offset voltage. This electrical part should be mounted using type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using a supply current of 1.1mA , this buffer op amp will be able to operate. In total, there are 1 circuits on this buffer amplifier. There are a total of 1 channels available on the op amps. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. A minimum voltage gain of 1 is the minimum voltage gain that this instrumentation amplifier is capable of producing.
MCP6N16-001E/MS Features
supply voltage of 2.9V
Output Type: Rail-to-Rail
MCP6N16-001E/MS Applications
There are a lot of Microchip Technology MCP6N16-001E/MS Instrumentational OP Amps applications.
- Micro signal measurement
- Home audio systems
- Power generator
- Weak signal detection
- ECG equipment
- RF cable systems
- Addition operation circuits
- Radiation thermometry transducers
- Video computer boards
- Subtraction operation circuits
