MCP6N16T-010E/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.9V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6N16 |
| JESD-30 Code | S-PDSO-G8 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Operating Supply Current | 1.1mA |
| Amplifier Type | Instrumentation |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 85μV |
| Bandwidth | 500 kHz |
| Supply Voltage Limit-Max | 6.5V |
| Voltage - Input Offset | 85μV |
| Input Offset Current-Max (IIO) | 0.0008μA |
| Voltage Gain-Min | 10 |
| Voltage Gain-Nom | 118 |
| Non-linearity-Max | 0.25% |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
MCP6N16T-010E/MS Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. A Instrumentation-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. Please take in mind that this instrumentation amplifier should be run at 2.9V. As far as the input offset voltage is concerned, linear amplifier rates at 85μV. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . This op amp can operate from a supply current at 1.1mA. A instrumentation amplifier like this has 1 circuits. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. As a result of this, the buffer amplifier is packed in TR. A voltage gain of 10 is the minimum this op amp can achieve.
MCP6N16T-010E/MS Features
supply voltage of 2.9V
Output Type: Rail-to-Rail
MCP6N16T-010E/MS Applications
There are a lot of Microchip Technology MCP6N16T-010E/MS Instrumentational OP Amps applications.
- Video data acquisition
- Medical imaging
- Hand-held batteries
- Industrial control system
- Proportional counter tubes
- Cinema or auditorium audio system
- Television broadcasting equipment
- Comparator
- Weak signal detection
- single/dual op amp sum and difference circuits
