MCP6S21T-I/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 6.4kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6S21 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Current - Supply | 1mA |
| Slew Rate | 22V/μs |
| Amplifier Type | Programmable Gain |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 275μV |
| Voltage Gain | 30.1dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Current - Output / Channel | 30mA |
| -3db Bandwidth | 12MHz |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6S21T-I/SN Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. An op amp of this type is a Programmable Gain-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. There are a total of 8 pins on this op amp. Please take in mind that op amp should be run at 4V. Instrumentation amplifier is a part of Other Analog ICs. 8 pins are included on the operational amplifiers. Op amp rates 275μV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperature30.1dB should remain the voltage gain. In total, there are 1 circuits on this buffer amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. As a whole, there are 1 elements that make up this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 5V voltage. For optimal performance, this electrical part should be connected to a supply with a current of 1mA. During testing, the buffer amplifier resistance should remain within a range of 6.4kOhm. It should be noted that the other type of analog integrated circuit used in this instrumentation amplifier is known as the ANALOG CIRCUIT.
MCP6S21T-I/SN Features
8 Pins
supply voltage of 4V
30.1dB voltage gain
Output Type: Rail-to-Rail
Resistance of 6.4kOhm
MCP6S21T-I/SN Applications
There are a lot of Microchip Technology MCP6S21T-I/SN Instrumentational OP Amps applications.
- Multimedia playback equipment
- Subtraction operation circuits
- Active probe
- Medical imaging
- Exponential operation circuits
- Biopotential
- High speed sample
- Instrumentation
- Signal filtering
- Fast A/D and D/A converters
