MCP6S22-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Resistance | 6.4kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4V |
| Base Part Number | MCP6S22 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 2mA |
| Current - Supply | 1mA |
| Slew Rate | 22V/μs |
| Amplifier Type | Programmable Gain |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 275μV |
| Bandwidth | 12MHz |
| Voltage Gain | 30.1dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage - Input Offset | 275μV |
| Current - Output / Channel | 30mA |
| Height | 3.3mm |
| Length | 9.46mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6S22-I/P Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. Please take in mind that op amp should be run at 4V. I would like to specify that this buffer amplifier belongs to the Other Analog ICs-type of devices. 8 pins are included on the operational amplifiers. There is an input offset voltage of 275μV for this buffer op amp. The mounting type that is recommended for this electrical part is Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The voltage gain should stay at 30.1dB. The buffer amp consists of 2 circuits in total. Instrumentation amplifier has 1 channels on it. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of instrumentation amplifier is rated 5V voltage. As a result, it is recommended that a power supply of 1mA be used with this electronic part. Instrumentation amplifier resistance should stay within the range of 6.4kOhm. There is also another type of analog IC used in this op amp ic that is called a ANALOG CIRCUIT-type IC.
MCP6S22-I/P Features
8 Pins
supply voltage of 4V
30.1dB voltage gain
Output Type: Rail-to-Rail
Resistance of 6.4kOhm
MCP6S22-I/P Applications
There are a lot of Microchip Technology MCP6S22-I/P Instrumentational OP Amps applications.
- Industrial control system
- Instrumentation
- Thermocouples
- Portable docking station
- Large motor controllers
- Radiation thermometry transducers
- Switching amplifier
- Voltage regulation circuit
- Mobile phone
- Scintillation detectors
