MCP6S22T-I/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 6.4kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6S22 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Circuits | 2 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1mA |
| Slew Rate | 22V/μs |
| Amplifier Type | Programmable Gain |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 275μV |
| Voltage Gain | 30.1dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| -3db Bandwidth | 12MHz |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6S22T-I/MS Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. The instrumentation amplifier in this picture is of the Programmable Gain-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. A total of 8 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 4V. A type of Other Analog ICs op amp ic can be identified by the fact that this is a type of Other Analog ICs device. It has 8 pins that make up the linear amplifier. The input offset voltage is 275μV. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . This op amp can operate from a supply current at 1mA. 30.1dB should remain the voltage gain. There are 2 circuits on this op amp. On the output type, there are Rail-to-Rail different types of op amps. There are 1 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. The op amp resistance should stay within the range of 6.4kOhm. Besides the analog ICs used in this instrumentation amplifier, there is also another type of analog IC called ANALOG CIRCUIT IC.
MCP6S22T-I/MS Features
8 Pins
supply voltage of 4V
30.1dB voltage gain
Output Type: Rail-to-Rail
Resistance of 6.4kOhm
MCP6S22T-I/MS Applications
There are a lot of Microchip Technology MCP6S22T-I/MS Instrumentational OP Amps applications.
- Digital cameras
- Displayers for aircraft and air transportation control systems
- Power control
- Communication
- PDA
- Laptop
- Broadcasting
- Video computer boards
- Power generator
- Portable electronic products powered by batteries
