MCP6S22T-I/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 6.4kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6S22 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Circuits | 2 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1mA |
| Slew Rate | 22V/μs |
| Amplifier Type | Programmable Gain |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 275μV |
| Voltage Gain | 30.1dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| -3db Bandwidth | 12MHz |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6S22T-I/SN Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the Programmable Gain-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There is a growing number of terminations approaching the number of 8. A total of 8 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 4V battery. To be specific, this instrumentation amplifier is a type of Other Analog ICs. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 275μV voltage. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Operational amplifier can operate supply current at 1mA. The voltage gain should stay at 30.1dB. A linear amplifier like this has 2 circuits on it. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The linear amplifier consists of 1 different elements in total. The operating supply voltage of instrumentation amplifier is rated 5V voltage. 6.4kOhm should be the range of resistance for the instrumentation amplifier. An analog IC that is also used in this instrumentation amplifier is referred to as the ANALOG CIRCUIT type.
MCP6S22T-I/SN Features
8 Pins
supply voltage of 4V
30.1dB voltage gain
Output Type: Rail-to-Rail
Resistance of 6.4kOhm
MCP6S22T-I/SN Applications
There are a lot of Microchip Technology MCP6S22T-I/SN Instrumentational OP Amps applications.
- Wireless base stations
- Addition operation circuits
- Video data acquisition
- Navigation
- Radiation thermometry transducers
- Integrator circuits
- Commercial audio systems
- Communication
- Switching amplifier
- Power generator
