MCP6S26-I/SL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 6.4kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6S26 |
| Pin Count | 14 |
| Output Type | Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Circuits | 6 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Current - Supply | 1mA |
| Slew Rate | 22V/μs |
| Amplifier Type | Programmable Gain |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 275μV |
| Bandwidth | 12MHz |
| Voltage Gain | 30.1dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage - Input Offset | 275μV |
| Current - Output / Channel | 30mA |
| Height | 1.25mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6S26-I/SL Overview
Packaging for the buffer amplifier is in the form of a 14-SOIC (0.154, 3.90mm Width) case. This is a Programmable Gain type op amp. In the case of Tube cases, linear amplifier will be delivered. The number of terminations is approaching the 14 mark. It consists of a total of 14 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 4V. A type of Other Analog ICs buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 14 pins. Regarding input offset voltage, op amp rates 275μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges -40°C~85°C. Voltage gain should remain at 30.1dB. There are 6 circuits on op amps. This op amp ic outputs Push-Pull, Rail-to-Rail signals, which is one of the many benefits it has. There are a total of 1 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. For optimal performance, this electrical part should be connected to a supply with a current of 1mA. 6.4kOhm should be the range of resistance for the linear amplifier. The other type of analog IC used in this op amp ic is known as ANALOG CIRCUIT.
MCP6S26-I/SL Features
14 Pins
supply voltage of 4V
30.1dB voltage gain
Output Type: Push-Pull, Rail-to-Rail
Resistance of 6.4kOhm
MCP6S26-I/SL Applications
There are a lot of Microchip Technology MCP6S26-I/SL Instrumentational OP Amps applications.
- Polarized electrodes
- Communication device
- Signal operation
- Vehicle electronics
- earphone
- Video conversion and routing
- Image computer boards
- Video amplifiers
- Information processing
- Exponential operation circuits
