MCP6S91-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10 TΩ |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6S91 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1.6mA |
| Slew Rate | 22V/μs |
| Amplifier Type | Programmable Gain |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 4mV |
| Gain Bandwidth Product | 18MHz |
| Voltage Gain | 30.1dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage - Input Offset | 400μV |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6S91-E/SN Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp of this type is a Programmable Gain-type. Instrumentation amplifier is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. In this case, there are 8 pins on the board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Other Analog ICs device. There are 8 pins on this chip. Op amp rates 4mV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~125°C. Using a supply current of 1mA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 30.1dB at all times. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There are 1 elements in total in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 5V voltage. Instrumentation amplifier resistance should stay within the range of 10 TΩ. The other types of analog IC are as follwed ANALOG CIRCUIT.
MCP6S91-E/SN Features
8 Pins
supply voltage of 5V
30.1dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ
MCP6S91-E/SN Applications
There are a lot of Microchip Technology MCP6S91-E/SN Instrumentational OP Amps applications.
- Medical imaging
- Industrial applications including automation
- Power transmission
- Active probe
- Hand-held batteries
- Oscilloscopes
- pH (acidity)
- Video computer boards
- Band-pass filter
- Commercial audio systems
