MCP6S91T-E/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10 TΩ |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6S91 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1.6mA |
| Slew Rate | 22V/μs |
| Amplifier Type | Programmable Gain |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 4mV |
| Gain Bandwidth Product | 18MHz |
| Voltage Gain | 30.1dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage - Input Offset | 400μV |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6S91T-E/MS Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. An op amp of this type is a Programmable Gain-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. Linear amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Other Analog ICs device. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 4mV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 1mA . It is a member of the 30.1dB's 30.1dB family. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. There are 1 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. In order for the buffer amplifier resistance to remain within the 10 TΩ range, the device should be tested. The other type of analog IC used in this op amp ic is known as ANALOG CIRCUIT.
MCP6S91T-E/MS Features
8 Pins
supply voltage of 5V
30.1dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ
MCP6S91T-E/MS Applications
There are a lot of Microchip Technology MCP6S91T-E/MS Instrumentational OP Amps applications.
- Digital cameras
- earphone
- High speed sample
- Cinema or auditorium audio system
- Logarithmic operation circuits
- Measurements of Wheatstone bridge
- Comparator
- Video amplifiers
- Active probe
- Precision measurement
