MCP6S93-E/UN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 10 TΩ |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6S93 |
| Pin Count | 10 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Circuits | 2 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 1.6mA |
| Current - Supply | 1mA |
| Slew Rate | 22V/μs |
| Amplifier Type | Programmable Gain |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 18MHz |
| Gain Bandwidth Product | 18MHz |
| Voltage Gain | 30.1dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage - Input Offset | 400μV |
| Current - Output / Channel | 25mA |
| Height | 1.1mm |
| Length | 3mm |
| Width | 4.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MCP6S93-E/UN Overview
In the package, you will find a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. Op amps are Programmable Gain types of amplifier on the chip. A Tube case is used to deliver the buffer op amp. There is a growing number of terminations approaching the number of 10. It consists of a total of 10 pins in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In order to be more specific, this instrumentation amplifier is one of the types of Other Analog ICs devices. A total of 10 pins are present on the instrumentation amplifier. Op amp rates 4mV as input offset voltage. This electronic part is best mounted with type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. 30.1dB should be the voltage gain. This op amp contains 2 circuits. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. Op amp has total of 1 elements. The operating supply voltage of instrumentation amplifier is rated 5V voltage. This electronic part is recommended to be used with an 1mA supply for best performance. 10 TΩ should be the range of resistance for the instrumentation amplifier. There is also another type of analog IC used in this op amp ic that is called a ANALOG CIRCUIT-type IC.
MCP6S93-E/UN Features
10 Pins
supply voltage of 5V
30.1dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ
MCP6S93-E/UN Applications
There are a lot of Microchip Technology MCP6S93-E/UN Instrumentational OP Amps applications.
- Multimedia playback equipment
- Exponential operation circuits
- Automotive sensors
- Weak signal detection
- Portable docking station
- Signal amplification
- High speed sample
- Home audio systems
- Television broadcasting equipment
- Computer workstations
