MCP6V06-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6V06 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 300μA |
| Supply Current-Max | 0.4mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 6pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 22mA |
| Input Offset Voltage (Vos) | 3μV |
| Bandwidth | 1.3MHz |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 158dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6V06-E/SN Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Op amps are Zero-Drift types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 8. A total of 8 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 1.8V volts. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 3μV. This electrical part should be mounted using type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Using an 300μA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 158dB at all times. There are 1 circuits on this op amp. Buffer op amp is equipped with 1 channels on the device. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage.
MCP6V06-E/SN Features
8 Pins
supply voltage of 1.8V
158dB voltage gain
Output Type: Rail-to-Rail
MCP6V06-E/SN Applications
There are a lot of Microchip Technology MCP6V06-E/SN Instrumentational OP Amps applications.
- Power transmission
- Commercial audio systems
- Image computer boards
- Measurements of Wheatstone bridge
- Active probe
- Instrumentation
- Switching amplifier
- Industrial applications including automation
- Non-polarized electrodes
- High input resistance broadband
