MCP6V06T-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6V06 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Current - Supply | 300μA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 6pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 3μV |
| Gain Bandwidth Product | 1.3MHz |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 158dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6V06T-E/SN Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the Zero-Drift-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 1.8V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are located on the operational amplifiers. Op amp ic rates 3μV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . The voltage gain should stay at 158dB. A instrumentation amplifier like this has 1 circuits. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. The linear amplifier is packaged by using a TAPE AND REEL axis. A supply of 300μA or higher is recommended for use with this electronic part.
MCP6V06T-E/SN Features
8 Pins
supply voltage of 1.8V
158dB voltage gain
Output Type: Rail-to-Rail
MCP6V06T-E/SN Applications
There are a lot of Microchip Technology MCP6V06T-E/SN Instrumentational OP Amps applications.
- RF cable systems
- earphone
- Band-stop filter
- Digital cameras
- Weak signal detection
- Weighing systems
- Image computer boards
- PDA
- Gaming industry
- Subtraction operation circuits
