MCP6V07-E/MD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6V07 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Nominal Supply Current | 300μA |
| Output Current | 22mA |
| Current - Supply | 300μA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 6pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 3μV |
| Gain Bandwidth Product | 1.3MHz |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 158dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.5V |
| Low-Bias | YES |
| Micropower | YES |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6V07-E/MD Overview
It is packaged in an 8-VDFN Exposed Pad-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the Zero-Drift-type. Instrumentation amplifier is delivered in a Tube case. There have been a total of 8 terminations over the past year. Linear amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 1.8V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 3μV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . There should be no change in the voltage gain at 158dB. On the output type, there are Rail-to-Rail different types of op amps. The total number of elements in this buffer amplifier is 2. A supply of 300μA or higher is recommended for use with this electronic part.
MCP6V07-E/MD Features
8 Pins
supply voltage of 1.8V
158dB voltage gain
Output Type: Rail-to-Rail
MCP6V07-E/MD Applications
There are a lot of Microchip Technology MCP6V07-E/MD Instrumentational OP Amps applications.
- Video data acquisition
- Medical imaging
- Automation control systems
- Professional videography
- Digital cameras
- Instrumentation
- Division circuits
- Video conversion and routing
- Computer workstations
- Mobile phone
