MCP6V08T-E/MNY
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6V08 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 2/5V |
| Number of Channels | 1 |
| Nominal Supply Current | 300μA |
| Output Current | 22mA |
| Current - Supply | 300μA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 6pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 3μV |
| Bandwidth | 1.3MHz |
| Voltage Gain | 158dB |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.5V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Height | 750μm |
| Length | 2mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6V08T-E/MNY Overview
In the package, you will find a 8-WFDFN Exposed Pad-case to contain the op amp ic. The instrumentation amplifier in this picture is of the Zero-Drift-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. It consists of a total of 8 pins in total. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 3μV voltage. Surface Mount is the recommended mounting type of operational amplifiers. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureYou should keep the voltage gain at 158dB for the time being. The op amp ic has 1 channels on it. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. As a recommendation, this electronic component should be used with a power supply that can deliver 300μA.
MCP6V08T-E/MNY Features
8 Pins
158dB voltage gain
Output Type: Rail-to-Rail
MCP6V08T-E/MNY Applications
There are a lot of Microchip Technology MCP6V08T-E/MNY Instrumentational OP Amps applications.
- High input resistance broadband
- Fast A/D and D/A converters
- Industrial control system
- Voltage regulation circuit
- Semiconductor detectors
- Signal amplification
- Automation control systems
- Multimedia playback equipment
- Information processing
- Fission chambers
