MCP6V11T-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6V11 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Nominal Supply Current | 7.5μA |
| Output Current | 17mA |
| Current - Supply | 7.5μA |
| Slew Rate | 0.03V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 119 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 8μV |
| Bandwidth | 80 kHz |
| Unity Gain BW-Nom | 80 kHz |
| Voltage Gain | 135dB |
| Power Supply Rejection Ratio (PSRR) | 118dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Current - Output / Channel | 17mA |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6V11T-E/OT Overview
Packaging for the buffer amplifier is in the form of a SC-74A, SOT-753 case. This is a Zero-Drift type op amp. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 5 terminations. To be specific, this instrumentation amplifier is a type of Operational Amplifier. In total, the buffer amplifier consists of 5 pins. Op amp rates 8μV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. There should be no change in the voltage gain. 1 channels are available on the instrumentation amplifier. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. This linear amplifier pack is based on the TAPE AND REEL axis. This electronic part is recommended to be used with an 7.5μA supply for best performance.
MCP6V11T-E/OT Features
135dB voltage gain
Output Type: Rail-to-Rail
MCP6V11T-E/OT Applications
There are a lot of Microchip Technology MCP6V11T-E/OT Instrumentational OP Amps applications.
- Division circuits
- Proportional counter tubes
- Computer workstations
- Hand-held batteries
- Oscilloscopes
- Tablets
- Gaming industry
- Radiation thermometry transducers
- earphone
- Test equipment
