MCP6V31UT-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6V31U |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 23μA |
| Nominal Supply Current | 23μA |
| Output Current | 21mA |
| Slew Rate | 0.13V/μs |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 21mA |
| Input Offset Voltage (Vos) | 8μV |
| Bandwidth | 300 kHz |
| Unity Gain BW-Nom | 300 kHz |
| Voltage Gain | 135dB |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6V31UT-E/OT Overview
Packaged in a SC-74A, SOT-753 case, the buffer op amp is ready to use. Op amps are Zero-Drift types of amplifier on the chip. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There have been a total of 5 terminations over the past year. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 5-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 8μV. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 23μA and 10 . You should keep the voltage gain at 135dB for the time being. There are 1 channels on the operational amplifiers. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals.
MCP6V31UT-E/OT Features
135dB voltage gain
Output Type: Rail-to-Rail
MCP6V31UT-E/OT Applications
There are a lot of Microchip Technology MCP6V31UT-E/OT Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- Professional videography
- Automation control systems
- Strain gauges
- Vehicle electronics
- Car stereo
- Precision measurement
- Displayers for aircraft and air transportation control systems
- Fast A/D and D/A converters
- Subtraction operation circuits
