MCP73113-16SI/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.1V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73113 |
| Pin Count | 10 |
| Output Voltage | 4.1V |
| Max Output Current | 1.1A |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 4.2V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 700μA |
| Output Current | 1A |
| Adjustable Threshold | YES |
| Max Input Voltage | 18V |
| Fault Protection | Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Voltage - Supply (Max) | 6.5V |
| Current - Charging | Constant - Programmable |
| Height | 880μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73113-16SI/MF Overview
The Tube package contains it.The 10-VFDFN Exposed Pad package includes it as a convenience.A mounting type of Surface Mount has been specified for this device.Setting the temperature to -40°C~85°C TA is the right thing to do.In order to provide its functionality, this device uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.To charge the device, there is a requirement for Constant - Programmable current.It is possible to find the related parts of this device by looking at its base part number MCP73113.It has a total of 10 terminations.Due to the 10 pins on it, it is a very simple circuit.To operate the product, it is necessary that 10 pins be inserted into the device.Currently, there are 1 channels available.It is recommended to use devices with a maximum supply voltage of 6.5V.There is a possibility that it can be powered by a 5.1V battery.6.5V supply voltage is not a problem for it.The efficiency of the system can be maximized if the output voltage is 4.1V.Operation is done using a 1A output current.This device belongs to the subcategory of Power Management Circuits.At a low supply voltage, such as 4.2V, it can operate to the best of its ability.A mounting requires that it align itself with Surface Mount.5V is the power supply setting for the part.This gadget's power supply has a current of 700μA flowing through it.There is a maximum input voltage of 18V volts that it can take.In order to comply with the constraints, the maximum output current is reduced to 1.1A.
MCP73113-16SI/MF Features
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
MCP73113-16SI/MF Applications
There are a lot of Microchip Technology MCP73113-16SI/MF Battery Chargers ICs applications.
- Remote control toys
- Wireless power
- Fast charge
- Energy harvesting
- Opportunity charge
- Home routers
- Golf carts
- Fleet management
- Industrial lighting
- Personnel carriers
