MCP73114-0NSI/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Rated | 4.221V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.1V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73114 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Max Output Current | 1.1A |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 4.2V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 700μA |
| Output Current | 1.1A |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.221V |
| Max Input Voltage | 18V |
| Nominal Input Voltage | 4V |
| Min Output Voltage | 4.079V |
| Fault Protection | Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Drain to Source Resistance | 350mOhm |
| Current - Charging | Constant - Programmable |
| Height | 939.8μm |
| Length | 2.9972mm |
| Width | 2.9972mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73114-0NSI/MF Overview
It is included in the Tube package for convenience.There is a 10-VFDFN Exposed Pad package included with this item that you will need to take care of.In this case, the device has a mounting type of Surface Mount.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.It provides its functionality by using an analog IC called POWER SUPPLY SUPPORT CIRCUIT.It is necessary to supply the device with Constant - Programmable current in order to charge it.The related parts of the base part number MCP73114 can be found by following the order of the base part number.It has 10 terminations.The device has 10 pins in total.During the installation process, this product requires the connection of 10 pins.A total of 1 channels are available for use.A 5.1V battery should be sufficient.It is crucial that the supply voltage of the device does not exceed 6.5V for the device to work properly.Using a 4.2V output voltage results in high efficiency.In order to operate, an output current of 1.1A is used.Devices belonging to subcategory Power Management Circuits include this device.It can function at as low a supply voltage as possible, such as 4.2V.In terms of the mounting, it is mounted in the way indicated by Surface Mount as far as the mounting is concerned.When it comes to the part's power supply, it is set to 5V.The gadget's supply current is set to 700μA.The maximum input voltage is 18V volts.This operation requires a voltage of 4.221V as the maximum output supply voltage.During operation, the maximum output current is reduced to 1.1A.
MCP73114-0NSI/MF Features
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
MCP73114-0NSI/MF Applications
There are a lot of Microchip Technology MCP73114-0NSI/MF Battery Chargers ICs applications.
- Tablets
- Electric pallet truck
- Trash compactors
- TV sticks
- Home routers
- Portable medical instruments
- Wireless headphones
- Rental fleets
- Portable medical equipment
- Digital camera
